Configurator

Valiant without control unit

Phased out - support up till 2024

Modern designed treadmill for various ergometry purposes. It can be controlled by external equipment. The low step-up height makes the treadmill perfectly suitable for all test subjects in the field of cardiology, rehabilitation and pulmonary function. The Valiant offers a smooth acceleration from 0 km/h and is continuously adjustable in a range of 0,5 – 20 km/h (0.3 – 12 mph). The treadmill can only be controlled with external equipment. An interface cable is not included. The standard elevation is 0-25%.

Successor: Valiant 2 cpet

Specifications

Maximum speed 20 km/h 12.4 mph maximum speed of the treadmill
Minimum operational speed 0.5 km/h 0.3 mph minimum speed of the treadmill
Positive elevation 25 % maximum positive angle as a percentage
Allowed user weight 160 kg 352.7 lbs maximum patient weight
USB connector
connection via USB possible
RS232 in connector
connection via RS232
Walking surface length 150 cm 59.1 inch length of the walking surface
Walking surface width 50 cm 19.7 inch width of the walking surface
Step up height 17 cm 6.7 inch height to step up the treadmill
Product length (cm) 213 cm 83.9 inch length of product in cm
Product width (cm) 90 cm 35.4 inch width of the product in cm
Product height 135 cm 53.1 inch height of product
Product weight 149 kg 328.5 lbs the weight of the product
Maximum motor power 1.8 kW the maximum power the motor will consume
IEC 60601-1:2005
the product is IEC 60601-1 3rd edition compliant
ISO 13485:2016 compliant
Lode fulfils ISO 13485:2016 requirements
ISO 9001:2015 compliant
Lode fulfills ISO 9001: 2015 requirements
Standard emergency lanyard
an emergency stop with a magnetic lanyard is present
Minimum operational temperature 14 °C minimum temperature at which the device will work within specification
Maximum operational temperature 40 °C maximum temperature at which the device will work within specification
Minimum operational air pressure 70 kPa minimum airpressure as from which the product will be operating within specification
Maximum operational air pressure 106 kPa maximum air pressure as from which the product will be operating within specification
Minimum operational non-condensing humidity 30 % minimum non-condensing humidity at which the product will operate within specification
Maximum operational non-condensing humidity 90 % maximum non-condensing humidity at which the product will operate within specification
Minimum storage & transport temperature -25 °C minimum temperature the product may be stored and transported at
Maximum storage & transport temperature 70 °C maximum temperature the product may be stored or transported at
Minimum air pressure storage & transport 50 kPa minimum air pressure the product may be stored or transported at
Maximum storage & transport air pressure 106 kPa maximum air pressure the product may be stored and transported at
Min. humidity storage & transport 10 % minimum non-condensing humidity that the product can be stored or transport at
Max. humidity storage & transport 95 % max. non-condensing humidity that the product can be stored or transported at
*Specifications are subject to change without notice.

Science

FAQ

Yes, you can find interface sheets for most common devices on the website at the "interfacing" tab of the product. If your CPET device is not present you can ask us to support you. In most cases we can quickly provide you with a solution.
Yes the Valiant Treadmill can be controlled by the LEM. The treadmill is supplied with a RS232 port and can be controlled by a seperate communicationport
Yes the Valiant Treadmill can be controlled by LCRM. The treadmill is supplied with a RS232 port and can be controlled by a seperate com port.
Yes you can. Make sure the chipset used in the converter is from FTDI to have good data acquisition.
Not sure what this means? Contact us and we will help you to get the right converter.
Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!

Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.

Part number

  • 932910

Certificates

CE Certificate Stress Test and Force Measurement Devices
ISO 9001:2015 Certificate
IEC 60601-1:2005 – ed. 3 + C1 + C2 (treadmills) certificate
cTuVUS certificate OEM treadmill
FDA Registration certificate
Manufacturers Declaration of Conformity 27 Lode

Manuals

Short manual Valiant English (September 2012)
Manual Valiant Dutch
Extended manual Valiant English
Manual Valiant French
Manual Valiant German
Manual Valiant Russian

Brochures

Brochure Cardio Pulmonary English
pdf
Brochure Cardio Pulmonary German
pdf
Brochure Cardio Pulmonary Spanish
pdf

Posters

Poster Cardio Pulmonary English
Poster Cardio Pulmonary German
Poster Cardio Pulmonary Spanish

Service

Part number

  • 932910

Drivers

FTDI Driver for USB

Interfacing protocols

AEI Technologies
Custo Med
Quinton
Custo Diagnostic Stress ECG
MOXUS Modular Metabolic System
Q-Stress