Valiant Pediatric without control unit
Phased out - support up till 2024
Modern designed treadmill for various ergometry purposes. It can be controlled by external equipment. It is specifically designed for children. A Valiant without Control Unit cannot be used as a standalone device. It has to be controlled by an external device.
Successor: Valiant 2 Pediatric
Specifications
| Maximum speed | 20 km/h | 12.4 mph | maximum speed of the treadmill |
| Minimum operational speed | 0.5 km/h | 0.3 mph | minimum speed of the treadmill |
| Positive elevation | 25 % | maximum positive angle as a percentage |
| Allowed user weight | 160 kg | 352.7 lbs | maximum patient weight |
| USB connector | connection via USB possible | ||
| RS232 in connector | connection via RS232 |
| Walking surface length | 127 cm | 50 inch | length of the walking surface |
| Walking surface width | 50 cm | 19.7 inch | width of the walking surface |
| Step up height | 17 cm | 6.7 inch | height to step up the treadmill |
| Product length (cm) | 190 cm | 74.8 inch | length of product in cm |
| Product width (cm) | 90 cm | 35.4 inch | width of the product in cm |
| Product height | 135 cm | 53.1 inch | height of product |
| Product weight | 135 kg | 297.6 lbs | the weight of the product |
| Maximum motor power | 1.8 kW | the maximum power the motor will consume |
| IEC 60601-1:2005 | the product is IEC 60601-1 3rd edition compliant | ||
| ISO 13485:2016 compliant | Lode fulfils ISO 13485:2016 requirements | ||
| ISO 9001:2015 compliant | Lode fulfills ISO 9001: 2015 requirements | ||
| Standard emergency lanyard | an emergency stop with a magnetic lanyard is present |
| Minimum operational temperature | 14 °C | minimum temperature at which the device will work within specification | |
| Maximum operational temperature | 40 °C | maximum temperature at which the device will work within specification | |
| Minimum operational air pressure | 70 kPa | minimum airpressure as from which the product will be operating within specification | |
| Maximum operational air pressure | 106 kPa | maximum air pressure as from which the product will be operating within specification | |
| Minimum operational non-condensing humidity | 30 % | minimum non-condensing humidity at which the product will operate within specification | |
| Maximum operational non-condensing humidity | 90 % | maximum non-condensing humidity at which the product will operate within specification | |
| Minimum storage & transport temperature | -25 °C | minimum temperature the product may be stored and transported at | |
| Maximum storage & transport temperature | 70 °C | maximum temperature the product may be stored or transported at | |
| Minimum air pressure storage & transport | 50 kPa | minimum air pressure the product may be stored or transported at | |
| Maximum storage & transport air pressure | 106 kPa | maximum air pressure the product may be stored and transported at | |
| Min. humidity storage & transport | 10 % | minimum non-condensing humidity that the product can be stored or transport at | |
| Max. humidity storage & transport | 95 % | max. non-condensing humidity that the product can be stored or transported at |
Related products
Accessories
FAQ
Yes, you can find interface sheets for most common devices on the website at the "interfacing" tab of the product. If your CPET device is not present you can ask us to support you. In most cases we can quickly provide you with a solution.
Yes the Valiant Treadmill can be controlled by the LEM. The treadmill is supplied with a RS232 port and can be controlled by a seperate communicationport
Yes the Valiant Treadmill can be controlled by LCRM. The treadmill is supplied with a RS232 port and can be controlled by a seperate com port.
During heartrate controlled cycling or running, you can determine a maximum heartrate limit. When this limit is reached, the ergometer/treadmill will adjust the workload/speed so the heartrate will stay more or less stable. You can perform a HR controlled test with the standard controller. You can program HR controlled protocols with the controller of the Valiant, Corival, Angio and Excalibur (more heartrate limits in one protocol (per step)), and the LEM (multi control) software module.
Yes you can. Make sure the chipset used in the converter is from FTDI to have good data acquisition.
Not sure what this means? Contact us and we will help you to get the right converter.
Not sure what this means? Contact us and we will help you to get the right converter.
For easy movement of a Valiant2 treadmill it is recommended to follow these steps:
- Connect the power cable and switch the treadmill on
- Start a manual test and set the inclination to 5%
- When the inclination has reached its target, disconnect the power cord
- Lift the back of the treadmill with two persons and place a mover cart under the black bar that is located under the rear roller.
Now you can wheel the treadmill around.
When you want to return the treadmill in its zero inclination position, simply connect the power cable, switch the treadmill on and initialize the manual mode. When the start button is pressed the treadmill will automatically return to its zero position.
- Connect the power cable and switch the treadmill on
- Start a manual test and set the inclination to 5%
- When the inclination has reached its target, disconnect the power cord
- Lift the back of the treadmill with two persons and place a mover cart under the black bar that is located under the rear roller.
Now you can wheel the treadmill around.
When you want to return the treadmill in its zero inclination position, simply connect the power cable, switch the treadmill on and initialize the manual mode. When the start button is pressed the treadmill will automatically return to its zero position.
Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!
Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.
Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.
Part number
- 931910
Certificates
CE Certificate Stress Test and Force Measurement Devices
ISO 9001:2015 Certificate
IEC 60601-1:2005 – ed. 3 + C1 + C2 (treadmills) certificate
FDA Registration certificate
Manufacturers Declaration of Conformity 27 Lode
Manuals
Manual Valiant Pediatric
Short manual Valiant English (September 2012)
Manual Valiant Dutch
Extended manual Valiant English
Manual Valiant French
Manual Valiant German
Manual Valiant Russian
Brochures
Service
Part number
- 931910
Drivers
FTDI Driver for USB
Interfacing protocols
AEI Technologies
Custo Med
Quinton
