OEM Recumbent Ergometer

Phased out - support up till 2027

The low start-up load of 7 Watt is unique. The ergometer can be controlled easily by all known stress ECG and pulmonary devices in the world. The ergometer has an eddy current electro-magnetic braking mechanism. The biggest advantage of this system is the accuracy which is one of the most important Lode principles. With this ergometer, the stress tests performed are reliable and reproducible. The workload is adjustable in a range of 7 to 1000 watt. Moreover, the noise level is reduced to a minimum. The recumbent ergometer can be used for obese and elderly test subjects and in rehabilitation settings, The ergometer is suitable for test subjects up to 250 kg. The Recumbent ergometer is easily accessible for all test subjects. It is possible to provide the ergometer with your logo and corporate colors (depending on sales quantity).

Specifications

Minimum leg length user (incl. adjustable pedals) 650 mm 25.6 inch leg length to fit to pedals when adjustable cranks are used (measured inseam)
Analog connector
read-out of ergometer load in an analog way
Product length (cm) 177 cm 69.7 inch length of product in cm
Product width (cm) 76 cm 29.9 inch width of the product in cm
Product height 112 cm 44.1 inch height of product
Product weight 79 kg 174.2 lbs the weight of the product
115 V AC 50/60 Hz (130 VA)
operational power
230 V AC 50/60 Hz (130 VA)
operational power
CE class Im according to MDD93/42/EEC
CE certified
CB according to IECEE CB
CB certified
Minimum operational temperature 14 °C minimum temperature at which the device will work within specification
Maximum operational temperature 40 °C maximum temperature at which the device will work within specification
Minimum operational air pressure 106 kPa minimum airpressure as from which the product will be operating within specification
Maximum operational air pressure 106 kPa maximum air pressure as from which the product will be operating within specification
Minimum operational non-condensing humidity 30 % minimum non-condensing humidity at which the product will operate within specification
Maximum operational non-condensing humidity 90 % maximum non-condensing humidity at which the product will operate within specification
Maximum storage & transport temperature 70 °C maximum temperature the product may be stored or transported at
Minimum air pressure storage & transport 50 kPa minimum air pressure the product may be stored or transported at
Maximum storage & transport air pressure 106 kPa maximum air pressure the product may be stored and transported at
Min. humidity storage & transport 10 % minimum non-condensing humidity that the product can be stored or transport at
Max. humidity storage & transport 95 % max. non-condensing humidity that the product can be stored or transported at
*Specifications are subject to change without notice.

FAQ

This is possible for all ergometers from 2004 on. Since 2009 it is possible to create yourn own calculation by using the adjustable resistance. Note: both pedalling speed and workload are taken into account by estimating the travelled distance.
Yes you can request the actual pedalling speed and power when you are cycling in Manual, Analogue or Terminal mode.
The load will only be returned when the pedalling speed is 30 RPM or more. For technical details see the Lode RS232 protocol
Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!

Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.

Part number

  • 929900

Certificates

ISO 13485: 2016 Certificate
CE Certificate Stress Test and Force Measurement Devices
ISO 9001:2015 Certificate
IEC 60601-1:2005 – ed. 3 + C1 + C2 (cycle ergometers) certificate
FDA Registration certificate
Manufacturers Declaration of Conformity 24 Lode
UL CSA Corival series certificate

Manuals

Manual Corival English
Communication protocol Lode ergometers

Brochures

Brochure OEM Recumbent Ergometer English
pdf
Brochure Cardio Pulmonary English
pdf
Brochure OEM Recumbent Ergometer German
pdf
Brochure Cardio Pulmonary German
pdf
Brochure OEM Recumbent Ergometer Spanish
pdf
Brochure Cardio Pulmonary Spanish
pdf

Posters

Poster Cardio Pulmonary English
Poster Cardio Pulmonary German
Poster Cardio Pulmonary Spanish

Service

Part number

  • 929900