Angio imaging - with Fixation Set for Instrument Rail

Modern ergometer with multifunctional applications

In this system, the Angio is supplied with a multifunctional fixation set. With this set, the Angio ergometer is equipped with pedal shoes and can be mounted easily on all Imaging / Physiotherapy / Examination tables that have a standard instrument side rail of 25x10 mm. The adjustability range is 625 - 903 mm (width) and 20-120 mm (height). *


The Angio imaging is an ergometer that can be used for both sitting and supine ergometry. Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used. The Angio operates independent of pedaling speed in the range of 7 - 1000 watt. The Angio imaging is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 7" colour display.


 


* Note: always check the width of the examination table on which the ergometer is going to be installed. There is a fixaton set available for tables that are smaller (#967820).


 


The Angio imaging with fixation set is standard equipped with pedal shoes.

Highlights

High standards

Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

Reliable and reproducible stress tests

The experience of professionals who calibrate many ergometers showed that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

Various test modes

Besides the hyperbolic (rpm-independent) mode that is used most of the time, the standard control unit offers several other test modes, like the fixed torque mode and the linear mode.These modes can be used in both manual and terminal mode.

Multifunctional

The ergometer can be used in various ergometry settings, enabling a multifunctional deployment.

Stability

Since athletes are getting more and more powerful and testing more extreme, the ergometer is designed for high workloads up to 2500 watt. Even the strongest and most powerful athletes will experience a stable and comfortable basis.

Features

Extreme low start up load

The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

Accurate over a long period of time

The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

Small adjustment steps

The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

RS232 connectivity

RS232 ports enable connectivity to most ECG and ergospirometry devices as well as PC's.

LCRM compatible

This product can be used with Lode Cardiac Rehabilitation Manager software (LCRM)
Versatile controls

Additional features with PCU

Besides the possibility to program 24 protocols easily, this control unit offers the following features:
- better monitoring because of the additional and larger display
- a perfect combination with BPM
- possibility to measure SpO2

Versatile Interfacing

Various interface protocols guarantee perfect communication with all commonly known stress ECG and spirometry equipment

Specifications

Workload range fixed torque 0,1 - 70 Nm Workload range in fixed torque mode
Minimum load 7 W the minimum load the ergometer can provide
Maximum peak load 1000 W the maximum load the ergometer can provide for a short period of time
Minimum load increments 1 W the smallest steps with which the load can be added
Maximum continuous load 750 W the maximum power the ergometer can deliver continuous
Hyperbolic workload control
control of workload in hyperbolic way
Linear workload control
control ergometer in a linear way
Fixed torque workload control
control ergometer in a fixed torque way
Maximum rpm independent constant load 150 rpm rpm as to which constant load can be applied
Minimum rpm independent constant load 30 rpm rpm as from which constant load can be applied
Optional heart rate controlled workload
control the device optionally through a set heartrate
Electromagnetic "eddy current" braking system
system that very accurately applies a brake to the ergometer
Dynamic calibration
continuous calibration during application of workload
Workload accuracy from 7 to 100 W 3 W accuracy of the ergometer between 7 and 100 Watt
Workload accuracy from 100 to 500 W 3 % accuracy of the ergometer between 100 and 500 Watt
Workload accuracy from 500 to 1000 W 5 % accuracy of the ergometer between 500 and 1000 Watt
Shoe size pedal shoe EU 32 - 41 Shoe size belonging to pedal size EU
Shoe size pedal shoe US male 1 - 8 Shoe size belonging to pedal size US male
Shoe size pedal shoe US female 1 - 9 Shoe size belonging to pedal size US female
Shoe size pedal shoe UK 12.5 (CH) - 7.5 (ad) Shoe size belonging to pedal size UK
Adjustability range height 20 - 120 mm adjustability range height
Adjustability range width 640 - 903 mm 25.2 kJ adjustability range width
Pedal shoes
premounted pedal shoes
English user interface
User interface available in English language
Chinese user interface
User interface available in Chinese language
Croatian user interface
User interface available in croatian language
Czech user interface
User interface available in Czech language
Danish user interface
User interface available in Danishlanguage
Dutch user interface
User interface available in Dutch language
Finnish user interface
User interface available in Finnish language
French user interface
User interface available in French language
German user interface
User interface available in German language
Greek user interface
User interface available in Greek language
Hungarian user interface
User interface available in Hungarian language
Italian user interface
User interface available in Italian language
Japanese user interface
User interface available in language
Korean user interface
User interface available in Korean language
Latvian user interface
User interface available in Latvian language
Lithuanian user interface
User interface available in Lithuanian language
Norwegian user interface
User interface available in Norwegian language
Polish user interface
User interface available in Polish language
Portugese user interface
User interface available in Portugese language
Romanian user interface
User interface available in romanian language
Russian user interface
User interface available in Russian language
Spanish user interface
User interface available in Spanish language
Swedish user interface
User interface available in Swedish language
Turkish user interface
User interface available in Turkish language
Ukrainian user interface
User interface available in Ukrainian language
Readout Distance
Readout the distance on control unit
Readout RPM
Readout the actual rpm on control unit
Readout Heartrate
Readout the actual heartarte on control unit
Readout target HR
Readout target heartarte on control unit (only possible with HR option)
Readout Energy
Readout the energy on control unit
Readout Torque
Readout torque on control unit
Readout Time
Readout time on control unit
Readout Power
Readout the actual power on control unit
Set Display
Choosing parameters to be shown on the display during the stress test
Set Resistance
Possibility to define a specific resistance for each test subject
Set P-Slope
Possibility to set the load regulation resistance
Set Mode
Possibility to define parameters to be adjusted during the stress test
Manual operation mode
Operate manually
Preset protocol operation mode
Operate via preset protocols
Terminal operation mode
operate with an external device
External control unit
a control unit is connected with a cable to the ergometer
Maximum table width 920 mm 36.2 inch maximum distance between the outside of the instrument rails on a patient table
Minimum table width 640 mm 25.2 inch minimum distance between the outside of the instrument rails on a patient table
Product length (cm) 54 cm 21.3 inch length of product in cm
Product width (cm) 68 cm 26.8 inch width of the product in cm
Product height 73 cm 28.7 inch height of product
Product weight 40 kg 88.2 lbs the weight of the product
V AC 100 - 240 V voltage in Volt
Phases 1 phases
Frequency 50/60 Hz frequency in Herz
Power consumption 160 W power consumption in Watt
Power cord IEC 60320 C13 with CEE 7/7 plug
European power cord and connector standard supplied with product
Power cord NEMA
NEMA power cord and connector
IEC 60601-1:2012
the product is IEC 60601-1 edition 3.1 compliant
ISO 13485:2016 compliant
Lode fulfils ISO 13485:2016 requirements
ISO 9001:2015 compliant
Lode fulfills ISO 9001: 2015 requirements
CE class Im according to MDD93/42/EEC
CE certified
CE class of product with optional SpO2 IIa CE class of product with optional SpO2
CE class of product with optional BPM IIa CE class of product with optional Blood Pressure Measurement
CB according to IECEE CB
CB certified
Minimum operational temperature 14 °C minimum temperature at which the device will work within specification
Maximum operational temperature 35 °C maximum temperature at which the device will work within specification
Minimum operational air pressure 80 kPa minimum airpressure as from which the product will be operating within specification
Maximum operational air pressure 106 kPa maximum air pressure as from which the product will be operating within specification
Minimum operational non-condensing humidity 30 % minimum non-condensing humidity at which the product will operate within specification
Maximum operational non-condensing humidity 90 % maximum non-condensing humidity at which the product will operate within specification
Minimum storage & transport temperature -20 °C minimum temperature the product may be stored and transported at
Maximum storage & transport temperature 60 °C maximum temperature the product may be stored or transported at
Minimum air pressure storage & transport 50 kPa minimum air pressure the product may be stored or transported at
Maximum storage & transport air pressure 106 kPa maximum air pressure the product may be stored and transported at
Min. humidity storage & transport 10 % minimum non-condensing humidity that the product can be stored or transport at
Max. humidity storage & transport 95 % max. non-condensing humidity that the product can be stored or transported at
*Specifications are subject to change without notice.

Science

FAQ

Yes you can request the actual pedalling speed and power when you are cycling in Manual, Analogue or Terminal mode.
The load will only be returned when the pedalling speed is 30 RPM or more. For technical details see the Lode RS232 protocol
The typical size for an instrument rail is 25 * 10 mm. The fixation set will fit that size.
In the SERVICE tab of every product, you find all available interfacing options.

You can download a short instruction on how to choose the right settings on your ergometer or treadmill and the ECG or ergospirometry device.
Yes you can. Make sure the chipset used in the converter is from FTDI to have good data acquisition.
Not sure what this means? Contact us and we will help you to get the right converter.
You can calculate with the following sizes:

Pedal shoe pediatric (917833, all segments):
EU: 24 - 31
US child: 8 - 13.5
UK child: 6.5 - 13

Pedal shoe (default, 917803, Imaging segment):
EU: 32 - 41
US male: 1 - 8
US female: 1 - 9
UK adult: 1 - 7.5

Pedal shoe XL (917834, Imaging segment):
EU: 42 - 48
US male: 8.5 - 13.5
US female: 9.5 - 13
UK adult: 8 - 13

Pedal shoe Corival/Recumbent (967835, Rehab and CPET segment):
EU: 32 - 48
US male: 1 - 13
US female: 1 - 14
UK adult: 1 - 13
Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!

Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.

Part number

  • 967905

Certificates

ISO 13485: 2016 Certificate
CE Certificate Stress Test and Force Measurement Devices
ISO 9001:2015 Certificate
IEC 60601-1:2005 Angio Ergometers
IEC 60601-1:2005 – ed. 3 + C1 + C2 (cycle ergometers) certificate
FDA Registration certificate
Manufacturers Declaration of Conformity 27 Lode
UL CSA Angio series certificate

Manuals

M967905 - Manual Angio imaging with fixation set Danish
M967905 - Manual Angio imaging with fixation set German
M967905 - Manual Angio imaging with fixation set English
M967905 - Manual Angio imaging with fixation set French
M967905 - Manual Angio imaging with fixation set Italian
M967905 - Manual Angio imaging with fixation set Lithuanian
M967905 - Manual Angio imaging with fixation set Dutch
M967905 - Manual Angio imaging with fixation set Polish
M967905 - Manual Angio imaging with fixation set Portuguese
M967905 - Manual Angio imaging with fixation set Swedish

Simulators

Simulator of 7 inch display, V1.0.39

Brochures

Brochure Angio imaging - with Fixation Set for Instrument Rail English
pdf
Brochure Imaging English
pdf
Brochure Angio imaging - with Fixation Set for Instrument Rail German
pdf
Brochure Imaging German
pdf
Brochure Angio imaging - with Fixation Set for Instrument Rail Spanish
pdf
Brochure Imaging Spanish
pdf

Posters

Poster Angio imaging - with Fixation Set for Instrument Rail English
Poster Imaging English
Poster Angio imaging - with Fixation Set for Instrument Rail German
Poster Imaging German
Poster Angio imaging - with Fixation Set for Instrument Rail Spanish
Poster Imaging Spanish

Service

Part number

  • 967905

Interfacing protocols

AEI Technologies
BTL
Cardiolex
CareFusion
Carewell
Cognimed
Cortex
Cosmed
Custo Med
Delmar Reynolds
Edan Instruments Inc.
Enverdis GmbH
ET Medical
GE Healthcare
Korr Medical Technologies Inc
Labtech
Med-tronik
Medical Graphics
Medset
Mesa Medizintechnik
Mortara
Neurosoft
Nihon Kohden
Norav
nSpire Health
Parvomedics
Philips Medical
Progetti
Pulse Biomedical, Inc.
Quinton
Schiller
Seiva
Welch Allyn
1350K
1500 K / 1550K - Cardiofax V
600 USB system
9320K
AT-10
AT-104 PC
AT-110
AT10 Plus
BreezeSuite Software
BTL-08 ECG
Cardiax PC-EKG
Cardio Coach Monitor
Cardio Collect 12
Cardiologic Explorer 12C Ergo
CardioPerfect
Cardiosoft
Cardiosoft + Corina
Cardiosoft MAC 1200 ST
CS200
Cubestress
Custo Diagnostic Stress ECG
EC Sense
EC12 R/S
Edan EC-12 EXPRESS
Edan ST-1212 STRESS ECG
Ergolog
Flashlight
GE Case
GE Case 8000
GE Case Basic
GE Case Performance
GE Case Premium
GE Case Value
K5
Lactware Software
MasterScreen® ECG / Viasys Oxycon Pro
Metasoft
Metasoft Studio
MOXUS Modular Metabolic System
MyStress system
PC-ECG 1200
Poly Spectrum
Q-Stress
QRS-card
Quark CPET
Quark PFT
Quark RMR
ST80i - A.03.00
StressVue
T12
TM Cardio 1000/2000
TrueOne
Vyntus CPX / SentrySuite as from 2.17 software
X-scribe