Ambient sensor pack
Check environmental conditions during test
The sensor pack allows for checking the following conditions:
- ambient temperature (C)
- air humidity (%)
- airpressure (mBar)
When a control unit is available the data can be made visible continuously.
Data will be able for viewing and storing in Lode software like LEM (from 10.4.1).
Highlights
Easy to operate
For Lode products this means:
- easy to connect
- easy to move around
- easy user interface
- easy to connect
- easy to move around
- easy user interface
High standards
Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.
Features
Custom View
Customer specific display setting
Display settings are adjustable according to your specific requirements: each individual has its specific wishes about the parameters to be displayed. This can easily be adjusted with the Lode ergometers.
3432 sensor points
High resolution sensor
The large number of sensor points allow for highly detailed gait analysis
Specifications
| Minimum measured air pressure | 550 hPa / mBar | Minimum measered air pressure | |
| Maximum measured airpressure | 1150 hPa / mBar | Maximum measured airpressure | |
| Measured air pressure accuracy 50 - 115 kPa (+/-) | 5 kPa | Measured air pressure accuracy 50 - 115 kPa | |
| Minimum measured temperature | 5 °C | Minimum measured temperature | |
| Maximum measured temperature | 50 °C | Maximum measured temperature | |
| Temperature measurement accuracy -25 - 85 °C (+/-) | 2 °C | Temperature measurement accuracy (+/-) -25 - 85 °C | |
| Minimum measured humidity | 10 % RH | Minimum measured humidity | |
| Maximum measured humidity | 90 % RH | Maximum measured humidity | |
| Measured humidity accuracy 10 - 90% RH (+/-) | 10 % RH | Measured humidity accuracy 10 - 90% RH (+/-) |
Compatibility
Compatibility
FAQ
Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!
Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.
Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.
Part number
- 945826
Manuals
m945826 - Manual Ambient Sensor Pack English
m945826 - Manual Ambient Sensor Pack Dutch
Brochures
High-res Posters
Poster Sports Medicine English
Poster Sports Medicine German
Poster Sports Medicine Spanish
Service
Part number
- 945826
