Adjustable cranks (will be replaced by #960804 in February 2020)

Will be replaced by #960804 in February 2020

Adjustability of cranks to allow for optimal force application at different limb length. The cranks are adjustable in a range of 80 - 180 mm, in steps of 5 mm. This option will be supplied instead of the standard cranks.

Specifications

Crank adjustment steps 5 mm 0.2 inch minimal step size to adjust cranks with
Crank adjustment length 100 mm 3.9 inch length over which the crank can be adjusted
Maximum crank length 180 mm 7.1 inch length of crank at maximum setting
Minimum crank length 80 mm 3.1 inch length of crank at minimum setting
*Specifications are subject to change without notice.

FAQ

Yes, Due to the fact that the scientific research on the spread of Covid-19 is not yet conclusive Lode recommends to disinfect and clean all Lode products and their accessories (cuffs, heart rate belts, SpO2 sensors, handgrips/rails, touchscreens etc) that are in contact with the patient and or the medical personnel with a standard disinfectant as used in the hospital before and after every patient, with attention and care!

Since these agents are sometimes aggressive it might be advisable to check the effect on sensitive surfaces, like cushioning on non-visible areas. Lode will not take responsibility for discoloration due to these agents.

Part number

  • 928804

Brochures

Brochure Adjustable cranks (will be replaced by #960804 in February 2020) English
pdf
Brochure Adjustable cranks (will be replaced by #960804 in February 2020) German
pdf
Brochure Adjustable cranks (will be replaced by #960804 in February 2020) Spanish
pdf

Service

Part number

  • 928804