Part number: 969901
Corival Recumbent rehab
Easy positioning and entrance for all test subjects

The latest design of the Corival Recumbent ergometer offers ergometry testing for test subjects up to 275 kg! Easy positioning and access is guaranteed by the electric adjustable seat and adjustable handgrips next to the seat. Moreover, the back support can be adjusted. For safety reasons, the back support can be positioned flat in CPR position in 1 step. This ergometer can be used for elderly and obese people and in rehabilitation settings. The Corival Recumbent is a special product from our Corival range.It is is standard supplied with a 7" control unit with touch screen and a bottle holder. Thanks to the built-in network module, the ergometer can be connected to the Lode Cardiac Rehab Manager Software, Lode Rehab Manager or the Lode Ergometry Manager. A USB A-B cable for service purposes only will be standard delivered with the product. To connect LEM or LCRM you need a special interface cable that can be ordered under part number 930930.

Looping Lode products Read more
Overview

Highlights
Reliable and reproducible stress tests
The experience of professionals who calibrate many ergometers showed that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.
Maximum patient weight 275 kg
Patients of up to 275 kg body weight can be tested on this ergometer
Electric adjustable seat positioning
The seat of the ergometer can be adjusted electrically.
Adjustable back support with flat CPR position
The back support can be adjusted in order to guarantee the most comfort position for each individual test subject. In case of emergency, the back support can be adjusted to a flat CPR position in 1 action.
Suitable for all body postures
This ergometer is designed to offer comfort ergometry testing for test subject of all body postures.
Features
Extreme low start up load
The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.
Accurate over a long period of time
The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.
Small adjustment steps
The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.
Versatile controls
Additional features with PCU
Besides the possibility to program 24 protocols easily, this control unit offers the following features:
- better monitoring because of the additional and larger display
- a perfect combination with BPM
- possibility to measure SpO2
Easy step-through
The ergometer has a comfortable step-through: a must for people who are not so mobile!
Specifications

Workload
Minimum load 7 W the minimum load the ergometer can provide
Maximum peak load 1000 W the maximum load the ergometer can provide for a short period of time
Minimum load increments 1 W the smallest steps with which the load can be added
Maximum continuous load 750 W the maximum power the ergometer can deliver continuous
Hyperbolic workload control
control of workload in hyperbolic way
Linear workload control
control ergometer in a linear way
Fixed torque workload control
control ergometer in a fixed torque way
Maximum rpm independent constant load 150 rpm rpm as to which constant load can be applied
Minimum rpm independent constant load 30 rpm rpm as from which constant load can be applied
Optional heart rate controlled workload
control the device optionally through a set heartrate
Electromagnetic "eddy current" braking system
system that very accurately applies a brake to the ergometer
Dynamic calibration
continuous calibration during application of workload
Accuracy
Workload accuracy from 7 to 100 W 3 W accuracy of the ergometer between 7 and 100 Watt
Workload accuracy from 100 to 500 W 3 % accuracy of the ergometer between 100 and 500 Watt
Workload accuracy from 500 to 1000 W 5 % accuracy of the ergometer between 500 and 1000 Watt
Comfort
Minimum leg length user (incl. adjustable pedals) 650 mm 25.6 inch leg length to fit to pedals when adjustable cranks are used (measured inseam)
Allowed user weight 275 kg 606.3 lbs maximum patient weight
Adjustability range seat 400 mm 15.7 inch saddle adjustment height range
User Interface
Readout Distance
Readout the distance on control unit
Readout RPM
Readout the actual rpm on control unit
Readout Heartrate
Readout the actual heartarte on control unit
Readout target HR
Readout target heartarte on control unit (only possible with HR option)
Readout Energy
Readout the energy on control unit
Readout Torque
Readout torque on control unit
Readout Time
Readout time on control unit
Readout Power
Readout the actual power on control unit
Set Display
Choosing parameters to be shown on the display during the stress test
Set Resistance
Possibility to define a specific resistance for each test subject
Set P-Slope
Possibility to set the load regulation resistance
Set Mode
Possibility to define parameters to be adjusted during the stress test
Manual operation mode
Operate manually
Terminal operation mode
operate with an external device
Selfdesigned protocol operation mode
operate via selfdesigned protocols
Dimensions
Product length (cm) 183 cm 72 inch length of product in cm
Product width (cm) 79 cm 31.1 inch width of the product in cm
Product height 149 cm 58.7 inch height of product
Product weight 107 kg 235.9 lbs the weight of the product
Power requirements
V AC 100 - 240 V voltage in Volt
Phases 1 phases
Frequency 50/60 Hz frequency in Herz
Power consumption 160 W power consumption in Watt
Power cord IEC 60320 C13 with CEE 7/7 plug
European power cord and connector standard supplied with product
Power cord NEMA
NEMA power cord and connector
Standards & Safety
ISO 13485:2003 compliant
Lode fulfils ISO 13485:2003 requirements
ISO 9001:2008 compliant
Lode fulfills ISO 9001: 2008 requirements
IEC 60601-1:2005
the product is IEC 60601-1 3rd edition compliant
Certification
CE class Im according to MDD93/42/EEC - pending
CE certification pending
CTüVus according to NRTL - pending
cTüVus certification - pending
CB according to IECEE CB - pending
CB certification pending
Environmental conditions
Maximum operational temperature 35 °C maximum temperature at which the device will work within specification
Minimum operational temperature 14 °C minimum temperature at which the device will work within specification
Maximum operational air pressure 106 kPa maximum air pressure as from which the product will be operating within specification
Minimum operational air pressure 80 kPa minimum airpressure as from which the product will be operating within specification
Maximum operational non-condensing humidity 90 % maximum non-condensing humidity at which the product will operate within specification
Minimum operational non-condensing humidity 30 % minimum non-condensing humidity at which the product will operate within specification
Maximum storage & transport temperature 60 °C maximum temperature the product may be stored or transported at
Minimum storage & transport temperature -20 °C minimum temperature the product may be stored and transported at
Maximum storage & transport air pressure 106 kPa maximum air pressure the product may be stored and transported at
Minimum air pressure storage & transport 50 kPa minimum air pressure the product may be stored or transported at
Max. humidity storage & transport 95 % max. non-condensing humidity that the product can be stored or transported at
Min. humidity storage & transport 10 % minimum non-condensing humidity that the product can be stored or transport at

*Specifications are subject to change without notice.
Accessories

Support

FAQ

Q - Is it possibe to estimate the travelled distance?

This is possible for all ergometers from 2004 on. Since 2009 it is possible to create yourn own calculation by using the adjustable resistance. Note: both pedalling speed and workload are taken into account by estimating the travelled distance.

Q - What is the principle of the Heart rate option?

The HR option is the well known Polar* heart rate receiver. The receiver is integrated in the software of the controller. The test subject has to wear the heart rate belt around the chest. The receiver is placed in front of the test subject (or integrated in the controller in case of a Corival) and the HR data will be displayed on the controller of the ergometer

Q - Is it possible to request RPM and Load data through the RS232 port while cycling in Manual mode.

Yes you can request the actual pedalling speed and power when you are cycling in Manual, Analogue or Terminal mode.
The load will only be returned when the pedalling speed is 30 RPM or more. For technical details see the Lode RS232 protocol

Q - Can I use a RS232 to USB converter to connect an ergometer?

Yes you can. Make sure the chipset used in the converter is from FTDI to have good data acquisition.
Not sure what this means? Contact us and we will help you to get the right converter.

Q - Can I loop Lode rehab products easily?

Yes! It is very easy to create a comfortable rehab setting with Lode rehab products by looping the ergometers:

The first Lode rehab ergometer can be connected to the PC with LCRM with a Lode proprietary network to PC cable (#930930).
The second product up till the last product can be connected to the previous one, a bus network configuration.

The last product always needs a termination plug to avoid interference and loss of data. All Lode rehab products come standard with such a termination plug.

Benefits
- Flawless data connection
- High bandwidth
- No interference of COM ports
- Looping
- Full access of all data in the product to LCRM

Part number
  • 969901

Certificates
ISO 13485:2003 Certificate
ISO 9001:2008 Certificate
Demo Software
Simulator of Control Unit 945834 as used with Corival
Simulator of Programmable Control Unit 945835 as used with Corival
Simulator of Display unit 945810 for Ergometer
Dimension pictures
Dimensions Corival Recumbent
LCRM Demo Software
Installation Instruction LCRM Demosoftware
950900 LCRM 2.7.1 demo software
LEM Demo Software
955900 LEM 10.5.1 Demo software
User guide
User Guide Corival English
Brochures
Brochure Corival Recumbent rehab English
Brochure Rehabilitation English
Brochure Corival Recumbent rehab German
Brochure Rehabilitation German
Posters
Poster Corival Recumbent rehab English
Poster Rehabilitation English
Poster Corival Recumbent rehab German
Poster Rehabilitation German
Service


Part number
  • 969901



Selection overview

Select application area

Sports Medicine logo
Sports Medicine
Imaging logo
Imaging
Cardio Pulmonary logo
Cardio Pulmonary
Rehabilitation logo
Rehabilitation
Pediatric logo
Pediatric